Back

How to restrict clock-in by location (geofencing)

Learn how to alert managers about, or block, mobile clock-ins and clock-outs made away from the workplace using geofencing.

Geofencing is available with Time Tracking Enterprise. The Alert and Block options only appear in policies of companies with this plan.

 

Overview

Geofencing compares the location of the employee's phone with the clock-in area of a workplace when they clock in or out. You can choose what Factorial does when an employee is away from the workplace:

  • Show me geolocation on a map: Factorial only records where employees clock in and out. There are no alerts and nothing is blocked.
  • Alert me of locations away from workplace: the clock-in or clock-out is saved, but it is flagged as a location issue and managers are alerted.
  • Block clocks ins away from workplace: the clock-in or clock-out is not saved if the employee is outside the clock-in area. Block includes everything that Alert does.

The option is shown as Block clocks ins away from workplace in the product, including the typo in "clocks ins". Look for it with this exact name.

 

Already had geofencing switched on? If your policy already had Block clocks ins away from workplace saved, employees are already being blocked and nothing changes for you. Check that every workplace has an address with coordinates (see the steps below).

 

Requirements

  • Time Tracking Enterprise.
  • Mobile clock in/out and Use geolocation enabled in the time tracking policy.
  • Each workplace has an address with coordinates.
  • Employees have accepted the geolocation policy, allowed location access for Factorial on their phone and turned on precise location. Block mode needs precise location.

Step 1: Set the clock-in area of the workplace

  1. In your sidebar, go to Settings
  2. From General settings, select Workplaces
  3. Open the workplace and make sure it has an address with coordinates
  4. Choose the geofencing radius of the clock-in area
  5. Save. The workplace settings are not saved automatically.

Alert and Block use the same clock-in area. The minimum radius is 50 m.

Make sure every workplace has an address with coordinates. A workplace without coordinates or radius cannot be checked correctly.

 

Step 2: Set the geolocation preference in the policy

  1. In your sidebar, go to Settings
  2. In Time, select Time tracking
  3. Open the time tracking policy
  4. Go to Policy settings and find the Time tracking system
  5. Enable Mobile clock in/out and Use geolocation
  6. In the Geolocation preferences dropdown, select one option: Show me geolocation on a map, Alert me of locations away from workplace or Block clocks ins away from workplace

Use geolocation and the preferences dropdown are saved immediately. The Submit button of the policy belongs to the Policy basics (name, description and effective date).

 

The three options are exclusive: you can only have one active at a time. You can also ask One to change this option for you (off, map, alert or block). You approve the change in the chat. One cannot set the clock-in area of a workplace.


Rules

  • What is checked: clock-in, clock-out and forgotten clock-out made with the mobile app (One on mobile included). On the phone, starting and ending a break go through the same location check.
  • Distance: the employee has to be inside the clock-in area of the workplace. We allow a small margin for GPS accuracy.
  • Which workplace: only the workplace selected on the clock-in screen is checked. It is pre-selected from the workplace of the last shift, and then from the main workplace. With Shift Management, only the workplaces planned for that day are offered. Clock-out checks the workplace of the open shift.
  • Work location tracking: if it is on, only Clock in from office is checked. Clock in from home and Clock in from business trip are never blocked or flagged. If it is off, every mobile clock-in is treated as office and checked.
  • Fake GPS: clocks made with a fake GPS location are refused.

What employees see when they are blocked

If the employee is outside the clock-in area, the app shows Outside of the expected location with the message "You need to be inside of the expected location to be able to clock in". The employee can tap Try again. If they are still outside, the app closes the flow with the message You couldn't clock, and nothing is recorded. There is no retry limit or waiting time: the employee can start again straight away.

If the app cannot get the location of the phone, it shows one of these messages:

Situation Title Message
Location permission not granted yet Enable geolocation clock in Factorial needs your location at the time you clock in and clock out, as your company has a geolocation policy.
Location permission denied Allow Factorial to use your location Your company has a geolocation policy for clock in and clock out. If you have questions, please contact your manager.
GPS or location services off We can't locate you It looks like location services are turned off for this device. We need your location for clock in and clock out.
Precise location off Confirm your location Turn on precise location to ensure accurate location and clock-in.
Location not found - Your location could not be retrieved, please try again in a place with a better GPS signal.

Where managers see locations and alerts

  • Map: in the web timesheet, click the location tag of a shift to open a map with the clock points and the workplace circle.
  • Real-time email: the direct manager receives an email for each clock made outside the area.
  • Weekly summary: location issues are included in the weekly summary email sent on Mondays.
  • Timesheet: a warning appears on the location tag, and you can use the Location issues filter.

These alerts stay on in Block mode, but they rarely appear because blocked clocks are not saved.


Limitations

  • Geofencing does not apply to web or desktop, kiosk or shared devices, QR code (Entrance App), face recognition or the API. The web never captures coordinates, so if your policy allows web clock-in, employees can clock in from anywhere.
  • Geofencing is not compatible with the Entrance App (QR). Turning one on switches the other off.
  • There is no restriction by IP address or Wi-Fi.
  • The minimum radius is 50 m.
  • Only one workplace is checked per clock.
  • Clocks created through the API and manual timesheet edits are not checked.

Troubleshooting and FAQ

An employee cannot clock in from the office. Check that the employee has allowed location access and precise location for Factorial, that the right workplace is selected on the clock-in screen, that the workplace has an address with coordinates, and that the clock-in area is big enough.

An employee clocks in from home and is not blocked. If work location tracking is on, Clock in from home and Clock in from business trip are exempt from the check.

Employees can clock in from anywhere on the computer. Geofencing does not apply to web clock-in. Disable web clock-in in the policy if you need to restrict it.

Is the employee's location tracked all day? No. Factorial only records the coordinates when the employee clocks in or out.

Where can I read more about geolocation and exports? See How to use geolocation in time tracking.

Was this article helpful?

Give feedback about this article

Can’t find what you’re looking for?

Our customer care team is here for you.

Contact us

Knowledge Base Software powered by Helpjuice